Done. Very easy install and works great.
[IMG]20170730_153349 by jon mal, on Flickr[/IMG]
[IMG]20170730_153335 by jon mal, on Flickr[/IMG]
[IMG]20170730_153330 by jon mal, on Flickr[/IMG]
Done. Very easy install and works great.
[IMG]20170730_153349 by jon mal, on Flickr[/IMG]
[IMG]20170730_153335 by jon mal, on Flickr[/IMG]
[IMG]20170730_153330 by jon mal, on Flickr[/IMG]
9.5 RPM (Red Passion Metallic)
Sport /Premium
"If the women don't find you handsome, they should at least find you handy"-Red Green
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
Nice!
2009 G8 GT
628.5 RWHP on gasoline ---> ARH Long Tubes 1 7/8" & full exhaust / Magnaflow Mid Muffler / Cherry Bomb Vortex Mufflers / Magnuson 1.9 / Overdrive "non-cog" pulley system / Ported blower base / 2.70" Pulley / LS3 rockers with Trunion upgrade / Trick Flow x255 cylinder heads / 8-Rib Pulley system / Innovator West 10% Balancer / DOD Delete / Lunati Lifters / Custom CTS-V Patrick G Cam Grind / Wiseco Forged Rods & Pistons / Injector Dynamics 85lbs / 4.25" Air Intake Tube / 102mm TB & MAF Tube / 102mm TPIS Throttle Body / LS7 MAF Card / ZL1 Fuel Pump / JMS Fuel Pump Booster / VaporWorx Controller / B&M Tranny Cooler with fan / Circle-D Heavy Duty Rebuild & 265mm triple Disc Billet Converter / Camaro Tranny Pan/ Eibach Lowering Springs / BMR Front & Rear Sway Bars, LCA's, Control Arms / DBA 4000xs Rotors / Hawks Ceramic Pads
It's currently plumbed without heat exchangers in the loop. I have to admit, been a while since I put the LSA on and needed a refresher on my work-of-art plumbing. I have a small reservoir off a gt500, at most two quarts. I have not run the car on the street yet, so no drive comments. I can state, with the HX, when idling in driveway, the IAT only went up until you started moving. With this system, while recharging the r134 -the IAT went down.
That all typed, the plan will be to keep my gt500 (2in version), delete the CTSV Hx and control with a 3 way valve off a prius.
I do want to reinforce how easy the install is. The machined parts fit perfect, the attachment to the frame rail is effortless.
9.5 RPM (Red Passion Metallic)
Sport /Premium
"If the women don't find you handsome, they should at least find you handy"-Red Green
Phillip M.
09.5 SBM GT Sports/Premium/Roof
Engine: Stock Bottom End
Heads: Stock, LS3 Intake, LY6 Exhaust, Milled
Cam: BTR IV PD
Intake: Stock Intake, Stock TB, LS7 MAF, Volant CAI
Exhaust: 1-7/8 Kooks LT's, Off-Road Pipes, Corsa cat-back
Fuel: Fore Twin Ti 450's, Vaporworx, E85, Bosch Injectors
Drivetrain: 6L80, Sonnax
Suspension: BMR 15" Strange Coilovers
Wheels/Tires: 15x10 RT-S on 275/60R15 Pro's, 17x5 Weld on M/T 28"
Ported LSA Blower, 9.55/2.55, 102 TB, Chiller
High Compression/Boost/E85
Ran some chores, sure was different watching the IAT temps. Here is an snapshot of my temps after 20minutes of around town driving. The outside temp is about 82 as the ambient sensor is dangling in the plastic support. Looks great to me.
[IMG]20170731_113017 by jon mal, on Flickr[/IMG]
9.5 RPM (Red Passion Metallic)
Sport /Premium
"If the women don't find you handsome, they should at least find you handy"-Red Green
FWIW, the chiller from Phil has been bullet proof. Works as advertised.
9.5 RPM (Red Passion Metallic)
Sport /Premium
"If the women don't find you handsome, they should at least find you handy"-Red Green
Still making them and selling through my website. I've revised the tubing routing to give a bit more clearance around the fog lamp on the SS. The kit works on all G8/PPV/SS applications.
I just finished up a -10 evaporator today that is desitined for a GXP. (Pictured on the right).
I've been really busy lately on also working on a C6/ZR1 application. I also have some dyno and track time planned in next few weeks on my G8.
Sent from my SM-G930P using Tapatalk
Phillip M.
09.5 SBM GT Sports/Premium/Roof
Engine: Stock Bottom End
Heads: Stock, LS3 Intake, LY6 Exhaust, Milled
Cam: BTR IV PD
Intake: Stock Intake, Stock TB, LS7 MAF, Volant CAI
Exhaust: 1-7/8 Kooks LT's, Off-Road Pipes, Corsa cat-back
Fuel: Fore Twin Ti 450's, Vaporworx, E85, Bosch Injectors
Drivetrain: 6L80, Sonnax
Suspension: BMR 15" Strange Coilovers
Wheels/Tires: 15x10 RT-S on 275/60R15 Pro's, 17x5 Weld on M/T 28"
Ported LSA Blower, 9.55/2.55, 102 TB, Chiller
High Compression/Boost/E85
Last edited by STL_G8GT; 09-17-2017 at 05:16 PM.
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader