VMR 20" V710 wheels Gloss Black with Falken tires, sensors and lugs.
Throwing these out here to see if there is any interest in this setup as I'm de-moding my car before I sell it.
Bought new earlier this year.
The wheels are VMR V710s in 20x10+45 and 20x9+35. I wanted gloss black so I purchased a new set and had them powder coated gloss black. The hub bore is correct for Holden cars (SS, G8 or Caprice) so no need for hub rings. The wheels do not require spacers to clear Brembo calipers (4 or 6 pot).
The tires are Falken (FK453) 285/30s in the rear and 245/35s up front. The fronts measure just under 9/32nds and the rears just under 6/32nds. Lots of tread life left.
They come with black splined lugs and sensors. They are balanced and are very smooth at all speeds. This setup has about 5,000 miles on them.
The only blemish is on one front wheel that has a small curb rash that will not be noticeable with a little touch up paint.
$2000 plus the ride. Figure on roughly $200 shipped but local pickup is free in the Albany NY area.
If they don't sell I'll just keep them for my next car but my loss is your gain at this price.
Contact me via email at jeffemad@yahoo.com
Sent from my iPhone using Tapatalk