Site Sponsors & Vendors
Results 1 to 9 of 9

Thread: Video of my first experience with 1/2 mile racing

  1. #1
    Addicted Member bracketracer's Avatar
    Join Date
    Jul 2009
    Location
    Dane, WI
    Posts
    643
    Post Thanks / Like

    Default Video of my first experience with 1/2 mile racing

    Mother Nature was certainly not kind on April 30 for NoFlyZoneMidwest at Rantoul, IL. Despite the wet runway, I'm glad that I braved conditions to give it a try. I managed 141 mph on RS-As, with a passenger, while using the windshield wipers! Can't wait to see how it will run with Drag Radials on a dry runway!

    https://www.youtube.com/watch?v=xUgW5581MGE
    Joe Morgan, G8 GXP Registry Organizer, G.O.N.E. Organizer
    2009.5 G8 GXP WH 6M onyx/red no roof 12.921 @ 108.89 BONE STOCK! (then), (now) 12.344 @ 110.92 with 1.688 60' at 766' DA, PB with new cam & tune 12.191 @ 112.35, 2:59 Second Lap Time Road America (Goodyear RS-As & Hawk HP Plus pads with stock rotors), 143.1298 mph NoFlyZoneMidwest 2017 1/2 mile into 20 mph headwind. RACECAR NOW RETIRED. All of these are final PBs.

    VCM OTR CAI, HSRK, Heater Hose Relocate, custom street/dyno tune by oldskoolgp, Comp Cams 224/228 .581"/.588" 112 LSA cam, LS7 lifters, PAC 1219x springs, Monster LT1S (C7 Corvette) Clutch kit, Katech C6 Hvy Dty Master & Slave Cylinders, Camaro 1LE Diff with 3.91 gears, Kooks LTHs, Solo Hi-Flo Cats & Connector Pipes, Solo Mach Balanced Catback, BMR Toe Rods, Trailing Arms, Cradle & Diff Poly Bushings, 2017 Chevy SS front & rear Brembo calipers and rotors.

  2. Thanks -Ray- thanked for this post
    Likes MongosG8 liked this post
  3. #2
    VIP Member Kermit's Avatar
    Join Date
    Oct 2008
    Location
    Va. Beach, VA
    Posts
    1,959
    Post Thanks / Like

    Default

    I'm sure that was fun. How many runs did you get in?
    2009 G8 GT MGM.
    Performance - 1900 MagnaCharger , Lunati Cam, RCR Ported Heads, Intake and TB, FAST #65 Injectors, CTS-v fuel pump, Kooks 1 3/4" LT and Catted X-Pipe, Pypes Violator Axel-Back, VCM OTR, RX Oil Catch Can, Pedders XA's & Track II Bushings, BMR Sub Frame Connectors, Sway Bars & Rear Control Arms, 19 Inch Staggered (8.5 front/9.5 Rear) VMR 810 Wheels, DBA 4000 Sloted Rotors with Hawk HPS Pads & Russels Brake Lines, Camaro 3.27 Diff, Gforce Axles.
    Cosmetic - Partially De-badged Rear, 6.0L Badges, Tinted Side, Rear Markers & Tail Lights, 35% Tint, Auto-dim Mirror, Spencers 6K 35W & 5K 25W Fog HIDS, Blacked Out Door Chrome, Vagas Nates 3 Gauge Pod W/Interceptor Gauges, Color Matched GXP Diffuser, Shark Fin Antenna, V-LEDs on Side/Rear Markers, Brakes & Back Ups Lights, MM Carbon Fiber Rear Spoiler


    1/4 mile 10.917 at 130.44mph 564 RWHP 568 Torque.

  4. #3
    Moderator, Retired -Ray-'s Avatar
    Join Date
    Aug 2008
    Location
    San Antonio, TX
    Posts
    20,438
    Post Thanks / Like

    Default

    Awesome video joe!
    Rest in Peace Charlie!

    Sold


    Just a GT


    Quote Originally Posted by RichsGreyGT View Post
    this site is hardcore modding central.

  5. #4
    VIP Member GXPaycheck's Avatar
    Join Date
    Aug 2008
    Location
    Clayton, NC
    Posts
    2,666
    Post Thanks / Like

    Default

    Ahhh, Chanute AFB. I spent a week there one afternoon.
    RIP Charlie, The GRRRR8 One


    [SIZE="2"][COLOR="Red"]

    2009 G8 GXP, #715 0f 1829 (one of 38 as optioned), MSM, M6, Sunroof, Onyx/Red (sold)
    2009 G8 GXP, #807 of 1829, MSM, A6, sunroof
    2016 Chevy SS, Mystic Green, roof, spare, #555 of 2221.




    You can push the envelope, but it's still stationery

  6. Likes TonyKarter, STL_G8GT liked this post
  7. #5
    VIP Member STL_G8GT's Avatar
    Join Date
    Jul 2009
    Location
    Estes Park, CO
    Posts
    5,001
    Post Thanks / Like

    Default

    Quote Originally Posted by GXPaycheck View Post
    Ahhh, Chanute AFB. I spent a week there one afternoon.
    Had to read that one twice.
    2009 PBM G8 GT
    Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
    Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
    TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
    Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul

    Originally Posted by TonyKarter
    Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
    RIP Charlie - GRRRR8
    RIP Chris Wells - Panzer Leader

  8. #6
    VIP Member kevinm0131's Avatar
    Join Date
    Nov 2008
    Location
    Oxford ohio
    Posts
    1,758
    Post Thanks / Like

    Default

    Sweet Joe, sucks that mother nature failed to cooperate.
    Kevin
    2009 SRM G8 GXP A6 + Roof
    Go
    Vararam CAI
    VMS "Stealth" Dyno Tune
    VMS HSRK
    GTPprix's hacked Atari gauges
    Norris Motorsports Billet Oil Catch Can
    Radical Advantage Trans dipstick
    Blendimount and Invisicord for the V-1
    Doug Thorley LT's

    Show
    Tint by Spade Kreations 35% & 20%
    Holden V-6 rad cover courtesy of Crazy Paul
    PB
    12.986 @ 108.78
    R.I.P. Charlie......FUCK Cancer!

  9. #7
    Junior Member seprish101's Avatar
    Join Date
    Apr 2016
    Posts
    20
    Post Thanks / Like

    Default

    Looks fun now i need to find one oklahoma thanks

    Sent from my SM-G860P using Tapatalk

  10. #8
    Addicted Member bracketracer's Avatar
    Join Date
    Jul 2009
    Location
    Dane, WI
    Posts
    643
    Post Thanks / Like

    Default

    I managed 3 runs by myself, and 3 runs with a passenger. Not ideal, but it sure beat a total rain-out. I can't wait to do this again with drag radials on dry pavement!
    Joe Morgan, G8 GXP Registry Organizer, G.O.N.E. Organizer
    2009.5 G8 GXP WH 6M onyx/red no roof 12.921 @ 108.89 BONE STOCK! (then), (now) 12.344 @ 110.92 with 1.688 60' at 766' DA, PB with new cam & tune 12.191 @ 112.35, 2:59 Second Lap Time Road America (Goodyear RS-As & Hawk HP Plus pads with stock rotors), 143.1298 mph NoFlyZoneMidwest 2017 1/2 mile into 20 mph headwind. RACECAR NOW RETIRED. All of these are final PBs.

    VCM OTR CAI, HSRK, Heater Hose Relocate, custom street/dyno tune by oldskoolgp, Comp Cams 224/228 .581"/.588" 112 LSA cam, LS7 lifters, PAC 1219x springs, Monster LT1S (C7 Corvette) Clutch kit, Katech C6 Hvy Dty Master & Slave Cylinders, Camaro 1LE Diff with 3.91 gears, Kooks LTHs, Solo Hi-Flo Cats & Connector Pipes, Solo Mach Balanced Catback, BMR Toe Rods, Trailing Arms, Cradle & Diff Poly Bushings, 2017 Chevy SS front & rear Brembo calipers and rotors.

  11. #9
    Addicted Member bracketracer's Avatar
    Join Date
    Jul 2009
    Location
    Dane, WI
    Posts
    643
    Post Thanks / Like

    Default

    Thanks Ray!
    Joe Morgan, G8 GXP Registry Organizer, G.O.N.E. Organizer
    2009.5 G8 GXP WH 6M onyx/red no roof 12.921 @ 108.89 BONE STOCK! (then), (now) 12.344 @ 110.92 with 1.688 60' at 766' DA, PB with new cam & tune 12.191 @ 112.35, 2:59 Second Lap Time Road America (Goodyear RS-As & Hawk HP Plus pads with stock rotors), 143.1298 mph NoFlyZoneMidwest 2017 1/2 mile into 20 mph headwind. RACECAR NOW RETIRED. All of these are final PBs.

    VCM OTR CAI, HSRK, Heater Hose Relocate, custom street/dyno tune by oldskoolgp, Comp Cams 224/228 .581"/.588" 112 LSA cam, LS7 lifters, PAC 1219x springs, Monster LT1S (C7 Corvette) Clutch kit, Katech C6 Hvy Dty Master & Slave Cylinders, Camaro 1LE Diff with 3.91 gears, Kooks LTHs, Solo Hi-Flo Cats & Connector Pipes, Solo Mach Balanced Catback, BMR Toe Rods, Trailing Arms, Cradle & Diff Poly Bushings, 2017 Chevy SS front & rear Brembo calipers and rotors.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •