Too bad. Time to build it stronger.
Too bad. Time to build it stronger.
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
I was wondering that. Can you make the diff stronger so that doesnt happen again? I didnt think I would have to with the power/tq I make. Its not like im making 600hp/tq. The car only makes 480/380 or something like that. It seems as though G8s are running 1.4s all day long and not breaking. Do they have built diffs?
Last edited by JonnyG2132; 09-26-2015 at 06:20 AM.
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY
What broke? The case, ring gear, and pinion are not readily upgraded. The differential portion itself can be upgraded (TrueTrak or WaveTrac).
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
I would assume the ring and pinion
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY
So I'm assuming that something happened with my ring and pinion because there are no fluids coming out to say that the cover cracked. If this is the case here is what I'm planning on getting:
3.45 or 3.73 ring and pinion
LPW rear cover
Eaton TrueTrac
BMR Differential Bushings Pro Version
Is there anything else that I would need to replace or get while the diff will be out?
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY
Go 3.45's and change the rear upper control arm bushings if you haven't already.
https://www.facebook.com/RickCrawfordRacing
2009 G8 GT-Rick Crawford- LS-4-SPEED@nc.rr.com
2.00 60ft 13.06 @ 106.65 w/ 1.85 SLP Rocker-HPTuner
1.97 60ft 12.97 @ 107.9 w/ 3.45 gears
1.97 60ft 12.87 @ 107.7 w/ 4"-2.5" exhaust
1.94 60ft 12.57 @ 111.9 w/ 217/225 Lunati cam
2.03 60ft 12.37 @ 115.3 w/ Doug Thorley headers
1.94 60ft 12.20 @ 115.0 w/ 219/233 Thumpr Cam
1.70 60ft 11.38 @ 121.5 w/ 100hp NOS Dry shot-HSW controller & 285/40 NT05 Drag Radials on stock 18's
1.72 60ft 11.65 @118.55 w/ 221/233 111LSA+0 Ported AirRam intake, Street tires. All Motor. DoD/AFM still functional.
1.66 60ft 10.87 @ 127.08 w/ 221/233 lunati, 2800 stall, 100HP wet nitrous shot, milled & ported LS3's.
1.65 60ft 10.81 @ 129.10 150Hp shot 2600 stall.
1.53 60ft 10.59 @ 129.72 ALL MOTOR! ! ! ! Fastest N/A G8 Record Holder
Ya I know the 3.45s are better at the track, I just liked the 3.70s on the street. We will see. On the suspension, I was going to get these bushings
Rear Cradle
Upper control arm inner
Lower control arm outer
Trailing arms
Either Toe Rods or just the Toe rod bushings
I don't want to spend a ton on suspension. Is that a good list or should I take something out or add anything?
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY
I ended up getting a 3.45 diff and put the Jannetty Posi Unit upgrade in.
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY
Good to hear! Should go 1.4x with some hook!
https://www.facebook.com/RickCrawfordRacing
2009 G8 GT-Rick Crawford- LS-4-SPEED@nc.rr.com
2.00 60ft 13.06 @ 106.65 w/ 1.85 SLP Rocker-HPTuner
1.97 60ft 12.97 @ 107.9 w/ 3.45 gears
1.97 60ft 12.87 @ 107.7 w/ 4"-2.5" exhaust
1.94 60ft 12.57 @ 111.9 w/ 217/225 Lunati cam
2.03 60ft 12.37 @ 115.3 w/ Doug Thorley headers
1.94 60ft 12.20 @ 115.0 w/ 219/233 Thumpr Cam
1.70 60ft 11.38 @ 121.5 w/ 100hp NOS Dry shot-HSW controller & 285/40 NT05 Drag Radials on stock 18's
1.72 60ft 11.65 @118.55 w/ 221/233 111LSA+0 Ported AirRam intake, Street tires. All Motor. DoD/AFM still functional.
1.66 60ft 10.87 @ 127.08 w/ 221/233 lunati, 2800 stall, 100HP wet nitrous shot, milled & ported LS3's.
1.65 60ft 10.81 @ 129.10 150Hp shot 2600 stall.
1.53 60ft 10.59 @ 129.72 ALL MOTOR! ! ! ! Fastest N/A G8 Record Holder
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY