I'm looking into upgrading my suspension a little to help the car hook up better at the track and on the street. I was going to just get the BMR Trailing arms and Adjustable Toe Rods. Should that be enough?
Thanks
Jon
I'm looking into upgrading my suspension a little to help the car hook up better at the track and on the street. I was going to just get the BMR Trailing arms and Adjustable Toe Rods. Should that be enough?
Thanks
Jon
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY
Those work well, you can also get the BMR lower control arm and upper coil-over mount so you can run a double adjustable coil over setup. Drops a little weight and being able to tighten the shock will help with the 60ft. I bought it but haven't had any time to try it.
https://www.facebook.com/RickCrawfordRacing
2009 G8 GT-Rick Crawford- LS-4-SPEED@nc.rr.com
2.00 60ft 13.06 @ 106.65 w/ 1.85 SLP Rocker-HPTuner
1.97 60ft 12.97 @ 107.9 w/ 3.45 gears
1.97 60ft 12.87 @ 107.7 w/ 4"-2.5" exhaust
1.94 60ft 12.57 @ 111.9 w/ 217/225 Lunati cam
2.03 60ft 12.37 @ 115.3 w/ Doug Thorley headers
1.94 60ft 12.20 @ 115.0 w/ 219/233 Thumpr Cam
1.70 60ft 11.38 @ 121.5 w/ 100hp NOS Dry shot-HSW controller & 285/40 NT05 Drag Radials on stock 18's
1.72 60ft 11.65 @118.55 w/ 221/233 111LSA+0 Ported AirRam intake, Street tires. All Motor. DoD/AFM still functional.
1.66 60ft 10.87 @ 127.08 w/ 221/233 lunati, 2800 stall, 100HP wet nitrous shot, milled & ported LS3's.
1.65 60ft 10.81 @ 129.10 150Hp shot 2600 stall.
1.53 60ft 10.59 @ 129.72 ALL MOTOR! ! ! ! Fastest N/A G8 Record Holder
Thanks a lot Rick. I will look into those. I was also looking into getting cradle bushings which I hear are very important to have.
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY
I'm wanting to do the exact same thing Jonny. I'm looking into fe3 shocks and struts with bushings/bearings and lower control arms and trailing arms and the upper control arm bushings. Or would all that be overkill do you think?