Brake Bleed Question

[-Ray-]

Put a little grease are the bleeder threads so air can't be sucked through the threads.
I have a mity vac, but I'm not a fan.

[Napalm]

I was just going to ask about vacuuming the fluid. Got a Astro vac which is similar to the mitivac. I am suppose to be able to attach a line to the bleeder nozzle on each caliber and suck the brake fluid out.

Any advice?

Put a little grease are the bleeder threads so air can't be sucked through the threads.
I have a mity vac, but I'm not a fan.

you can do that - and I have done that many a timie.

like Ray said put some grease on the rubber nipple they supply so it will seal a bit better - because after the 3rd wheel - it will be loose.

but where it's really helpful is using it to suck old fluid out of the reservoir before you start. when you flush it clean.

[WhatNext]

OK thanks guys. Just need some warmer weather now.