Site Sponsors & Vendors
Results 1 to 4 of 4

Thread: cts-v calipers left to right

  1. #1
    Junior Member drmrgal's Avatar
    Join Date
    Aug 2014
    Location
    central va.
    Posts
    28
    Post Thanks / Like

    Default cts-v calipers left to right

    Getting ready to do my brake upgrade cts-v brembos and was wondering if the right and left caliper for the front are the same. I know I would have to move the crossover tube and the bleeders. Just don't know if the bolt holes are the same, mounting location yada yada yada.

  2. #2
    VIP Member BuildItYourSelf's Avatar
    Join Date
    May 2012
    Location
    merca!!!
    Posts
    1,422
    Post Thanks / Like

    Default

    Different.
    The Pistons are different sizes and the small piston is the leading one. The reason it to get even pad wear.
    2008 GT-M. PBM, #885

  3. #3
    Junior Member drmrgal's Avatar
    Join Date
    Aug 2014
    Location
    central va.
    Posts
    28
    Post Thanks / Like

    Default

    [QUOTE=BuildItYourSelf;590864]Different.
    The Pistons are different sizes and the small piston is the leading one.

    Ok but I thought that the front calipers had the same size pistons. I know the rears do that's why you swap the cross overtubes and bleeders and then install on the opposite side.

  4. #4
    VIP Member BuildItYourSelf's Avatar
    Join Date
    May 2012
    Location
    merca!!!
    Posts
    1,422
    Post Thanks / Like

    Default

    Nope. Same concept applies to the front. And pretty much every multi piston Caliper.

    Four part numbers. One for each corner.
    2008 GT-M. PBM, #885

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •