Site Sponsors & Vendors
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Adam's In and Out Spray is Back in Stock!!!

  1. #1
    Adams Liason Ben@Adams's Avatar
    Join Date
    Oct 2008
    Posts
    525
    Post Thanks / Like

    Default Adam's In and Out Spray is Back in Stock!!!

    Adam's In and Out Spray is now Back in Stock!!!

    Click on the image below to place your order!

    In and Out is BACK.jpg
    Email: forums@AdamsPolishes.com
    Follow us on Facebook and Twitter @AdamsPolishes
    Use the code GRRRR8 at checkout to save 10% off your next order at www.AdamsPolishes.com

  2. #2
    Beyond Help texn884's Avatar
    Join Date
    May 2010
    Location
    Helotes, Texas
    Posts
    4,939
    Post Thanks / Like

    Default

    Did adams vanish from the forum?
    2009 Panther Black Metallic "The Black Rat"
    Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.

    Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
    Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
    11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.

    New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
    Sounds so GRRRR8 BECAUSE RACE CAR

    7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed Curt here

  3. #3
    VIP Member STL_G8GT's Avatar
    Join Date
    Jul 2009
    Location
    Estes Park, CO
    Posts
    5,001
    Post Thanks / Like

    Default

    Quote Originally Posted by texn884 View Post
    Did adams vanish from the forum?

    We're not driving Vettes, that's for sure ;-)
    2009 PBM G8 GT
    Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
    Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
    TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
    Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul

    Originally Posted by TonyKarter
    Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
    RIP Charlie - GRRRR8
    RIP Chris Wells - Panzer Leader

  4. #4
    Beyond Help texn884's Avatar
    Join Date
    May 2010
    Location
    Helotes, Texas
    Posts
    4,939
    Post Thanks / Like

    Default

    Oh well they will come back when they see sales drop and wonder why.
    2009 Panther Black Metallic "The Black Rat"
    Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.

    Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
    Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
    11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.

    New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
    Sounds so GRRRR8 BECAUSE RACE CAR

    7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed Curt here

  5. #5
    Administrator Chewy's Avatar
    Join Date
    Aug 2008
    Location
    Bettendorf, IA
    Posts
    7,298
    Post Thanks / Like

    Default

    Let's just say they replaced some people with others. Also, they saw a HUGE drop off about 3 years ago from the G8 community. I'm hoping Ben does a better job keeping everyone up to date here.

    Like posting these things:


    2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!

  6. #6
    Administrator Chewy's Avatar
    Join Date
    Aug 2008
    Location
    Bettendorf, IA
    Posts
    7,298
    Post Thanks / Like

    Default

    Well, I just emailed Dylan and it looks like they pulled all their support to ALL Pontiac forums in November due to a very low ROI. I can't say I blame them really.

    I have PM'd Steve to figure out what he'd like to do with this and other non-supporting vendors.

    2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!

  7. #7
    VIP Member STL_G8GT's Avatar
    Join Date
    Jul 2009
    Location
    Estes Park, CO
    Posts
    5,001
    Post Thanks / Like

    Default

    Inevitable, I guess
    2009 PBM G8 GT
    Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
    Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
    TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
    Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul

    Originally Posted by TonyKarter
    Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
    RIP Charlie - GRRRR8
    RIP Chris Wells - Panzer Leader

  8. #8
    VIP Member GXPaycheck's Avatar
    Join Date
    Aug 2008
    Location
    Clayton, NC
    Posts
    2,666
    Post Thanks / Like

    Default

    Most of us are already on the Adams forum anyway.
    RIP Charlie, The GRRRR8 One


    [SIZE="2"][COLOR="Red"]

    2009 G8 GXP, #715 0f 1829 (one of 38 as optioned), MSM, M6, Sunroof, Onyx/Red (sold)
    2009 G8 GXP, #807 of 1829, MSM, A6, sunroof
    2016 Chevy SS, Mystic Green, roof, spare, #555 of 2221.




    You can push the envelope, but it's still stationery

  9. Likes Chewy liked this post
  10. #9
    Beyond Help texn884's Avatar
    Join Date
    May 2010
    Location
    Helotes, Texas
    Posts
    4,939
    Post Thanks / Like

    Default

    Do we still get the discount?
    2009 Panther Black Metallic "The Black Rat"
    Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.

    Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
    Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
    11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.

    New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
    Sounds so GRRRR8 BECAUSE RACE CAR

    7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed Curt here

  11. #10
    VIP Member GXPaycheck's Avatar
    Join Date
    Aug 2008
    Location
    Clayton, NC
    Posts
    2,666
    Post Thanks / Like

    Default

    Yup!
    RIP Charlie, The GRRRR8 One


    [SIZE="2"][COLOR="Red"]

    2009 G8 GXP, #715 0f 1829 (one of 38 as optioned), MSM, M6, Sunroof, Onyx/Red (sold)
    2009 G8 GXP, #807 of 1829, MSM, A6, sunroof
    2016 Chevy SS, Mystic Green, roof, spare, #555 of 2221.




    You can push the envelope, but it's still stationery

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •