koni install with spohn strut to spindle bolts
This weekend I'm hoping to install some suspension goodies. Have front and rear koni yellows, super pro strut mounts,bmr bearings, moog bump stops , and spohn strut to spindle bolt kit. I've read almost every koni replacement thread, so I have an idea what I'm getting into. But the spohn bolts, anyone use them to replace the tty's. And if so, what are the torque values for them?
Thanks, Marc
09 Whitehot G8Gt
mods: Superchips 91vararam perf tune, Vararam, hood heat extractor mod , Koni sport yellows shocks/ Strut inserts,SuperPro bearings and strut mounts. SuperPro lca and radius arm, BMR sway bar end links.
1/4 mile 12.96 using cortex recorder.
0-60 4.5
The tty bolts on my car have been on and off more than a few times. So don't worry about it if you have to use them.
2008 GT-M. PBM, #885
Ok, sucks cause I have the bolts already.
09 Whitehot G8Gt
mods: Superchips 91vararam perf tune, Vararam, hood heat extractor mod , Koni sport yellows shocks/ Strut inserts,SuperPro bearings and strut mounts. SuperPro lca and radius arm, BMR sway bar end links.
1/4 mile 12.96 using cortex recorder.
0-60 4.5
I bought those bolts too. Mine didn't come with torque recommendations either and I couldn't find anything on Spohn's site, so they sit on my shelf. I've reused the original bolts 3 times now. If you reuse yours you can add a little treadlocker for good measure.
09 White Hot G8 GT
Tuned by Rick Crawford
Kooks, Circle-D, Vararam, HSRK, BP catch can, RP oil
DBA 4000, Hawk Ceramic, Russel Stanless, Ate Super Blue,
FE3, Whiteline, BMR, UMI, Spohn
Homelink, Adams Premium, Infinity Reference
I finally got an answer. At first I was told by email tech support that they do not carry that part (then how do i have it if you don't carry it). So i called , I was told 20-40 ft lbs to hold strut on, then finish with 125 ft lbs
09 Whitehot G8Gt
mods: Superchips 91vararam perf tune, Vararam, hood heat extractor mod , Koni sport yellows shocks/ Strut inserts,SuperPro bearings and strut mounts. SuperPro lca and radius arm, BMR sway bar end links.
1/4 mile 12.96 using cortex recorder.
0-60 4.5
Posting Permissions
Reply With Quote