wheel bearings

[BuildItYourSelf]

Yes but you have to also swap the control arms and get cts tie rods.
There's a write up on the other board.

[Rob@WretchedMS]

the camaro bearings and spindles are beefier and don't fit as a direct replacement.
Upgrading can be done but at a large expense since a lot of things need to be changed.

Camaro rear upper arms, rear knuckles, and bearings are all different too, as well as the axles, and brake lines.

rear lower arms, toe links, trailing arms are all the same as the 2010-2011 camaro,