-
nice times! congrats! my little lunati is going in sunday!
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
I see you over on the other board a lot. I usually forget about this board . glad to see your getting closer to your 120mph
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Senior Member
Awesome run!!! I also got a new PB with that cam after working out a few things/changing some parts out. Congrats.
Bolt Ons/tune-
12.90@108.51 2.002 60ft.
P/B-Cam only 12.14@115 1.9 60 Ft
PB with blower@7#s-11.7@124 1.8 60 Ft
PB with blower@12#s-10.9@127 1.62 60Ft still stock converter and trans!
+built trans/ZL1 converter 10.63@130.97 1.58 60Ft
full weight with stock 19s on front!!!
with cam-431Hp/400Tq
with LSA@7.5#-581Hp/495Tq
With LSA @12#-589Hp/552Tq
with LSA @12# and more timing-unknown
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Senior Member
12.1 with stock top end is very nice!
219/223 .625 .625 112, 11.78 @ 119, 440/421, Crawford heads, tb, intake. Kooks 1 3/4 lts and solo Mach balance catted with added Solo resonators, VCM, 3.45's, stock stall.
-
Senior Member
Okay so not completely stock, they have ls3 valves in them and of course springs to support the cam but no porting/polishing/milling.either way I'm extremely happy with the results. Next stop, 11s!!! Looking at your mods list gives me hope.
Bolt Ons/tune-
12.90@108.51 2.002 60ft.
P/B-Cam only 12.14@115 1.9 60 Ft
PB with blower@7#s-11.7@124 1.8 60 Ft
PB with blower@12#s-10.9@127 1.62 60Ft still stock converter and trans!
+built trans/ZL1 converter 10.63@130.97 1.58 60Ft
full weight with stock 19s on front!!!
with cam-431Hp/400Tq
with LSA@7.5#-581Hp/495Tq
With LSA @12#-589Hp/552Tq
with LSA @12# and more timing-unknown