-
Moderator
Originally Posted by
Crazy Paul
10 thou over x 4" stroke = 404
A trip to the machine shop now
2009 Karma Metallic G8 GT The best gift you can give to someone is your time,because you're giving them something that you can never get back
-
Moderator
Building a Livernois 404 stroker.
Bad cam bearing. this view is the top of #1 bearing
This is the bottom side of #1 cam bearing. All the ones that we can see look like this
Measuring the cam
Last edited by -Ray-; 09-23-2014 at 02:01 AM.
2009 Karma Metallic G8 GT The best gift you can give to someone is your time,because you're giving them something that you can never get back
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Originally Posted by
G8 GT V8
Sounds awesome, but why not a 419?
I would assume he's using the stock LS2 block which can't be bored and stroked past 404 or 406 without some less conventional work which I believe Livernois is capable of doing now if memory serves... Either way, the 404 will be MORE than enough...
Good luck Travis! It'll be a FUN ride when you're done! Just build it right like Ray did his 419 and it'll be more reliable than stock.
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
-
Tuning-Porting-Mods
Wow, thru the copper on the top side....
https://www.facebook.com/RickCrawfordRacing
2009 G8 GT-Rick Crawford- LS-4-SPEED@nc.rr.com
2.00 60ft 13.06 @ 106.65 w/ 1.85 SLP Rocker-HPTuner
1.97 60ft 12.97 @ 107.9 w/ 3.45 gears
1.97 60ft 12.87 @ 107.7 w/ 4"-2.5" exhaust
1.94 60ft 12.57 @ 111.9 w/ 217/225 Lunati cam
2.03 60ft 12.37 @ 115.3 w/ Doug Thorley headers
1.94 60ft 12.20 @ 115.0 w/ 219/233 Thumpr Cam
1.70 60ft 11.38 @ 121.5 w/ 100hp NOS Dry shot-HSW controller & 285/40 NT05 Drag Radials on stock 18's
1.72 60ft 11.65 @118.55 w/ 221/233 111LSA+0 Ported AirRam intake, Street tires. All Motor. DoD/AFM still functional.
1.66 60ft 10.87 @ 127.08 w/ 221/233 lunati, 2800 stall, 100HP wet nitrous shot, milled & ported LS3's.
1.65 60ft 10.81 @ 129.10 150Hp shot 2600 stall.
1.53 60ft 10.59 @ 129.72 ALL MOTOR! ! ! ! Fastest N/A G8 Record Holder
-
VIP Member
Error 404: Stroker Not Found...
Is this thing done yet!? Congrats Travis, might as well put a couple snails on it while it's out...
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Charlie - GRRRR8
RIP Chris Wells - Panzer Leader
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Moderator
Originally Posted by
Chewy
I would assume he's using the stock LS2 block which can't be bored and stroked past 404 or 406 without some less conventional work which I believe Livernois is capable of doing now if memory serves... Either way, the 404 will be MORE than enough...
Good luck Travis! It'll be a FUN ride when you're done! Just build it right like Ray did his 419 and it'll be more reliable than stock.
Correct on the bore. More then enough?
It will be right because it is coming out of the same garage
2009 Karma Metallic G8 GT The best gift you can give to someone is your time,because you're giving them something that you can never get back
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-Ray- thanked for this post
-
Moderator
Originally Posted by
G8-4-Speed
Wow, thru the copper on the top side....
That is the only 1 that we can see right now.
2009 Karma Metallic G8 GT The best gift you can give to someone is your time,because you're giving them something that you can never get back
-
Moderator
Originally Posted by
STL_G8GT
Is this thing done yet!?
Congrats Travis, might as well put a couple snails on it while it's out...
Snails would be nice but I am WAY over budget already.
2009 Karma Metallic G8 GT The best gift you can give to someone is your time,because you're giving them something that you can never get back
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
VIP Member
Originally Posted by
Chewy
I would assume he's using the stock LS2 block which can't be bored and stroked past 404 or 406 without some less conventional work which I believe Livernois is capable of doing now if memory serves... Either way, the 404 will be MORE than enough...
Good luck Travis! It'll be a FUN ride when you're done! Just build it right like Ray did his 419 and it'll be more reliable than stock.
Gotcha...thanks for the info. I was assuming that he was buying a new short block like Ray did. 404 would be the way to go then... Should be a beast!!!
Marty
G8 gone, but not forgotten...
-
Moderator, Retired
I received an estimate from Livernois. They are shipping it to us. Michigan sales tax is more than the shipping charges.
Rest in Peace Charlie!
Sold
Just a GT
Originally Posted by
RichsGreyGT
this site is hardcore modding central.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes