Right now everything else is stock (exhaust manifolds, cats, midpipe), I am waiting on my Kooks stuff to come in. I will try to get a sound clip up soon, maybe later this afternoon.
Right now everything else is stock (exhaust manifolds, cats, midpipe), I am waiting on my Kooks stuff to come in. I will try to get a sound clip up soon, maybe later this afternoon.
G8 GXP SRM M6 #1816
415 rwhp / 406 rwtq
RotoFab CAI; Kooks LTH / Catted X-Pipe; Borla Pro XS Mufflers
Tuned by G-Force Motorsports
G8 GXP PBM M6 #788 - SOLD
451 rwhp / 425 rwtq
Katech Cam; RotoFab CAI; Kook's 1-7/8" Mids; Borla Catback
Tuned by G-Force Motorsports
The sound is a little louder than how the video sounds. I would say it is about a 50 - 75% increase in sound level over stock GXP mufflers. I can definitely tell when driving.
G8 GXP SRM M6 #1816
415 rwhp / 406 rwtq
RotoFab CAI; Kooks LTH / Catted X-Pipe; Borla Pro XS Mufflers
Tuned by G-Force Motorsports
G8 GXP PBM M6 #788 - SOLD
451 rwhp / 425 rwtq
Katech Cam; RotoFab CAI; Kook's 1-7/8" Mids; Borla Catback
Tuned by G-Force Motorsports
What Borla mufflers, part numbers and where did you get them/ cost?
SOLD 5/16 BOUGHT 2013 PP SHO...2009 GT 0-60 4.1,RWHP 381@4765,TQ 416.11@3828= 12.58@109.78 KOOKs 1 7/8 /race CATS, VARARAM & HSRK RESONATOR DELETE/3 INCH X PIPE to MAGNAFLOW SS F:Michilin pilot A/S3, R: Cooper Zeon RS3, VCM Ecm/TCM tune by Troy, Russell SS brake lines, hawk hps/ DBA 4000XS, NGK TR-5, YellaTerra 1.85Rockers PAC 1218, CC 7.450 Pro Magnum Rods, FULL BMR poly Rear/DIFF White BUSHINGS,BMR trailing arms/toe rods.FE3 shock/struts, Billet Catch Can, LOVELL's strut mounts/BMR bushing,UDP Ported&PolishTB,red Alto,CircleD 3000
Borla 40358 from Amazon seller "Everything-Aftermarket" for $73.45 each. Bought on Tuesday, received Thursday.
ETA: You can get it cheaper from another site if you search but I knew this seller would have them to me quicker
Last edited by ls3gxphouston; 04-25-2014 at 08:49 PM.
G8 GXP SRM M6 #1816
415 rwhp / 406 rwtq
RotoFab CAI; Kooks LTH / Catted X-Pipe; Borla Pro XS Mufflers
Tuned by G-Force Motorsports
G8 GXP PBM M6 #788 - SOLD
451 rwhp / 425 rwtq
Katech Cam; RotoFab CAI; Kook's 1-7/8" Mids; Borla Catback
Tuned by G-Force Motorsports
Actually the borla xs pro tested to be the quietest of the high performance mufflers. Quieter than the hooker max flow while producing slightly more power.
I do not know if they drone however in the 1700 to 2200 rpm range. Plus you are stock right now. It would be comparing apples to oranges with someone who has headers, no cats, and removed the resonators.
2009 g8gt - rotofab cai, ported throttle body & FAST intake, 1 7/8s kooks shorties with 3 inch exhaust. 3600 circle D triple disc stall and tranni cooler, udp, hoosier 17 inch drag radials. 223/235 cam/gmpp Heads. HP Tuners. 416 with 11.3 to 1 compression.
best time: 11.47 @ 118.7 3000 feet da
best top end 119.4 4000 feet da
G8 GXP SRM M6 #1816
415 rwhp / 406 rwtq
RotoFab CAI; Kooks LTH / Catted X-Pipe; Borla Pro XS Mufflers
Tuned by G-Force Motorsports
G8 GXP PBM M6 #788 - SOLD
451 rwhp / 425 rwtq
Katech Cam; RotoFab CAI; Kook's 1-7/8" Mids; Borla Catback
Tuned by G-Force Motorsports
I have Kooks mids 1 7/8 to high flow mini cats into 2.5 id X pipe then straight pipe to axle back Magnflow ss mufflers. There was drone until the X pipe was installed. I had several configurations of exhaust all had drone of various degrees until the X pipe install. The X pipe seems to make all mufflers tolerable. The Magnaflow mini straightthrough ss mufflers are perfect. Flow like no mufflers at all, has deep powerful exhaust note, lightweight compared to stock, been on over 100,000 miles and to me have that hard to get deep cruising v8 sound and when WOT have the nasty authoritative power sound.
SOLD 5/16 BOUGHT 2013 PP SHO...2009 GT 0-60 4.1,RWHP 381@4765,TQ 416.11@3828= 12.58@109.78 KOOKs 1 7/8 /race CATS, VARARAM & HSRK RESONATOR DELETE/3 INCH X PIPE to MAGNAFLOW SS F:Michilin pilot A/S3, R: Cooper Zeon RS3, VCM Ecm/TCM tune by Troy, Russell SS brake lines, hawk hps/ DBA 4000XS, NGK TR-5, YellaTerra 1.85Rockers PAC 1218, CC 7.450 Pro Magnum Rods, FULL BMR poly Rear/DIFF White BUSHINGS,BMR trailing arms/toe rods.FE3 shock/struts, Billet Catch Can, LOVELL's strut mounts/BMR bushing,UDP Ported&PolishTB,red Alto,CircleD 3000