I haven't gotten mine yet. It's taking forever!!
Sent from my iDevice using data nodes and algorithms.
I haven't gotten mine yet. It's taking forever!!
Sent from my iDevice using data nodes and algorithms.
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
they musta got put on the slow boat
Did you order them through BMR's website.. that's to long of a wait time for me, I'm deploying end of March and need to get them in before then
(2009) G8 Gt
Vararam Cai, JBA shorty headers, x-pipe to solo axle backs. and many more mods to come...
BMR yes!
Sent from my iDevice using data nodes and algorithms.
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
Do any other reputable sites carry the same products BMR does, that won't take forever to get here?
(2009) G8 Gt
Vararam Cai, JBA shorty headers, x-pipe to solo axle backs. and many more mods to come...
I'm sure others can get them, but chances of you finding someone that stocks them is slim to none!
Sent from my iDevice using data nodes and algorithms.
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
Ok, looks like I might as well bite the bullet then.. seems ad though they're to good to pass up.
Thanks chewy!
(2009) G8 Gt
Vararam Cai, JBA shorty headers, x-pipe to solo axle backs. and many more mods to come...
We should be receiving our order from SuperPro tomorrow!!! We should have a few sets of these arms left over after any backorders are given first priority.
T.C. Davis
BMR G8/5th Gen Camaro Classic GM Tech/Sales
tc@bmrsuspension.com
www.bmrsuspension.com
813.986.9302
Like us on Facebook!
Yay!! Finally
(2009) G8 Gt
Vararam Cai, JBA shorty headers, x-pipe to solo axle backs. and many more mods to come...
Me= "first priority"! YAY!
Sent from my iDevice using data nodes and algorithms.
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
Posting Permissions
Reply With Quote