Site Sponsors & Vendors
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: VIR North, April 6, 2013, Session 2

  1. #1
    VIP Member
    Join Date
    Oct 2008
    Location
    Apex, NC
    Posts
    1,330
    Post Thanks / Like

    Default VIR North, April 6, 2013, Session 2

    I did VIR North back in April and haven't had time to upload the vids until now. Here's the one from session 2. It's a little short as I lost my serpentine belt toward the end so I cut that out. Sorry about the wind noise; I forgot to put tape across the mic this time to mute it so you will want to have the volume down a little if you are interested in checking it out. Enjoy!

    http://www.youtube.com/watch?v=JLMeh...ature=youtu.be
    2009 Hot White G8 GT, CTS-V v1 fronts, Camaro 20's, BMR Sways, Eibach Springs, Rear Cradle bushings. GXP FE3's, BMR rear susp. Kooks 1 7/8 LT headers, RCR custom 3” exhaust, ported LSA blower, 2.38 pulley; Ported heads and TB; LS7 MAF, Racetec pistons, Scat rods, CTS-V crank; FAST 85 injectors; RCR Lunati cam: 223/238 .615/.601, 116 +2 LSA. CTS-V pump/VaporWorx cntlr. Built trans, Methanol injection. Rick Crawford built and tuned. Best 1/4 9.68 @142, 1.42 60'.

  2. #2
    VIP Member
    Join Date
    Mar 2009
    Location
    Monroe. OH
    Posts
    3,427
    Post Thanks / Like

    Default

    Looks like fun. What is with all the slow Corvettes

    Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
    PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
    ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
    CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
    9.75@139.2 ? rwhp ? rwtq

  3. #3
    Senior Member Troy TrackBeast's Avatar
    Join Date
    Jun 2012
    Location
    Holly Springs, NC
    Posts
    330
    Post Thanks / Like

    Default

    Awesome! Thanks for sharing Doug! One of these days I will get out there and join you guys...
    Rick Crawford Racing Top End, Full Bolt-Ons, and PI 2600 Stall
    Current PB: 11.00 @ 125.91 --60' 1.61
    My YouTube Channel

  4. #4
    VIP Member Bill Brollier's Avatar
    Join Date
    Sep 2009
    Location
    Norman, OK
    Posts
    547
    Post Thanks / Like

    Default

    Doug, lookin' good.

    Where-ever did you have the "camera" mounted. It was as close to perfect as I have seen!

    Darned near like being there!

  5. #5
    VIP Member STL_G8GT's Avatar
    Join Date
    Jul 2009
    Location
    Estes Park, CO
    Posts
    5,001
    Post Thanks / Like

    Default

    Very cool, good stuff!!
    2009 PBM G8 GT
    Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
    Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
    TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
    Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul

    Originally Posted by TonyKarter
    Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
    RIP Charlie - GRRRR8
    RIP Chris Wells - Panzer Leader

  6. #6
    VIP Member
    Join Date
    Oct 2008
    Location
    Apex, NC
    Posts
    1,330
    Post Thanks / Like

    Default

    Thanks all! Bill, I had the camera mounted on a bracket off my headrest posts. It was fun passing the 'Vettes but there was a wicked fast M3 and a couple GT3's that ate my lunch pretty good on another session!
    2009 Hot White G8 GT, CTS-V v1 fronts, Camaro 20's, BMR Sways, Eibach Springs, Rear Cradle bushings. GXP FE3's, BMR rear susp. Kooks 1 7/8 LT headers, RCR custom 3” exhaust, ported LSA blower, 2.38 pulley; Ported heads and TB; LS7 MAF, Racetec pistons, Scat rods, CTS-V crank; FAST 85 injectors; RCR Lunati cam: 223/238 .615/.601, 116 +2 LSA. CTS-V pump/VaporWorx cntlr. Built trans, Methanol injection. Rick Crawford built and tuned. Best 1/4 9.68 @142, 1.42 60'.

  7. #7
    VIP Member Bill Brollier's Avatar
    Join Date
    Sep 2009
    Location
    Norman, OK
    Posts
    547
    Post Thanks / Like

    Default

    Pictures of the camera mount?

  8. #8
    VIP Member
    Join Date
    Oct 2008
    Location
    Apex, NC
    Posts
    1,330
    Post Thanks / Like

    Default

    Quote Originally Posted by Bill Brollier View Post
    Pictures of the camera mount?
    Here's a link where you can buy it (also shows a picture of how it works):
    http://www.cruisecam.com/products.html
    2009 Hot White G8 GT, CTS-V v1 fronts, Camaro 20's, BMR Sways, Eibach Springs, Rear Cradle bushings. GXP FE3's, BMR rear susp. Kooks 1 7/8 LT headers, RCR custom 3” exhaust, ported LSA blower, 2.38 pulley; Ported heads and TB; LS7 MAF, Racetec pistons, Scat rods, CTS-V crank; FAST 85 injectors; RCR Lunati cam: 223/238 .615/.601, 116 +2 LSA. CTS-V pump/VaporWorx cntlr. Built trans, Methanol injection. Rick Crawford built and tuned. Best 1/4 9.68 @142, 1.42 60'.

  9. #9
    VIP Member GXPaycheck's Avatar
    Join Date
    Aug 2008
    Location
    Clayton, NC
    Posts
    2,666
    Post Thanks / Like

    Default

    Quote Originally Posted by Doug Hilliard View Post
    Here's a link where you can buy it (also shows a picture of how it works):
    http://www.cruisecam.com/products.html
    I have one as well. Nice piece of equipment. Too bad I don't have a good camera to go with it!
    RIP Charlie, The GRRRR8 One


    [SIZE="2"][COLOR="Red"]

    2009 G8 GXP, #715 0f 1829 (one of 38 as optioned), MSM, M6, Sunroof, Onyx/Red (sold)
    2009 G8 GXP, #807 of 1829, MSM, A6, sunroof
    2016 Chevy SS, Mystic Green, roof, spare, #555 of 2221.




    You can push the envelope, but it's still stationery

  10. #10
    Addicted Member Matt82's Avatar
    Join Date
    Mar 2009
    Location
    Fort Rucker, AL
    Posts
    832
    Post Thanks / Like

    Default

    I grew up about 45 minutes from there. I wish I had gone. Its funny though I recognize the hotel from one of the Top Gear episodes. Looks like a blast, especially in a well built car like yours.
    RIP Charlie!

    2009 MGM G8 GT
    Vararam, PaceSetter, Magnaflow, Comp, Pac, Yank
    11.95 @ 116.64

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •