Hard heater hoses from Camaro

[joemomma]

Are you planning to make these similar to the Tech AFX setup?


Sent from my iPhone using Tapatalk

[BuildItYourSelf]

Are you planning to make these similar to the Tech AFX setup?


Sent from my iPhone using Tapatalk

Yes. But it will be higher up.

[BuildItYourSelf]

So the update is this.
I will make them out of stainless for many reasons.
1. It will last forever and look good.
2. If it was aluminum the wall thickness will restrict flow more then a thin stainless.
3 I will tig the elbow on a straight and the bracket on the tube. This will give you a more flexible adjustment to get the lines in place and a strong mount.
Downfall is the price is more then aluminum.
A quote is pending on materials. If I were to guess your looking at about $80 with hose ends. Probably $50 if you use the stock hose and cut to fit the ends.
None of these prices are for sure. Just a guess right now.
With that price area if anyone out yet?
Polished is free but you gotta do it! Haha (I hate polishing stainless) I plan on doing a "scotch Brite rub" this way you can scrub the line to make it look new with a pad. It's a clean brushed look but dirt sticks to it a little.
I plan on ten sets. So far it looks like there is 4 yes and 1 maybe. So speak up for the other 5 soon.

First I will order enough for one and make mine. Post pics so there is no surprise or anything.

I'll keep you guys posted

[cstmg8]

Still in

[TooManyHobbies]

Tempted, but would need to make sure it would work with my coil covers.

[Markmsf3]

Count me in for a set for sure.

[GingerBeard Man]

So the update is this.
I will make them out of stainless for many reasons.
1. It will last forever and look good.
2. If it was aluminum the wall thickness will restrict flow more then a thin stainless.
3 I will tig the elbow on a straight and the bracket on the tube. This will give you a more flexible adjustment to get the lines in place and a strong mount.
Downfall is the price is more then aluminum.
A quote is pending on materials. If I were to guess your looking at about $80 with hose ends. Probably $50 if you use the stock hose and cut to fit the ends.
None of these prices are for sure. Just a guess right now.
With that price area if anyone out yet?
Polished is free but you gotta do it! Haha (I hate polishing stainless) I plan on doing a "scotch Brite rub" this way you can scrub the line to make it look new with a pad. It's a clean brushed look but dirt sticks to it a little.
I plan on ten sets. So far it looks like there is 4 yes and 1 maybe. So speak up for the other 5 soon.

First I will order enough for one and make mine. Post pics so there is no surprise or anything.

I'll keep you guys posted

Considering the TechAFX kit is like $120, anything below that would be ideal, but given the fact that a single guy is doing this, price can change. A company likely gets a far better deal on parts and materials...I'm still in unless my issues develops into a larger one and I have to replace before you finish.

[tchr49]

Still interested

[BuildItYourSelf]

Tempted, but would need to make sure it would work with my coil covers.

No reason it wouldn't. I have coilovers also. But the hose is not close to suspension

[BuildItYourSelf]

Tempted, but would need to make sure it would work with my coil covers.

No reason it wouldn't. I have coilovers also. But the hose is not close to suspension.