Todd
2009.5 G8 GXP, M6, Liquid Red, Sunroof #1769
Show: CTS-V Wheels, HSV Sliding Console, HSV Triple Gauge Pod with Front Smokers Pack
Go: TVS2300, Kooks 1 7/8 Mids with HFCs, Corsa Cat Back, RotoFab CAI, Livernois Tune, McLeod RXT Twin Disc, gForce 750HP Axles528 RWHP 498 RWTQ
11.69 @ 123.25 (1.94 60' Spinning)
Those with the Aeroforce gauge, does it display A/FR and fuel pressure for our cars? Trying to decide what all I need in the way of gauges. Going LSA so I want Boost, FP, AFR and trans temp for sure... I have the Atari panel already so going for a pillar pod and need to decide on 2 or 3. Wish I could change the Atari from engine oil temp to trans but oh well.
thanks!
OK, that answers the question. Since I have the HpTuner and adding a wideband logger I will look at my options. Probably just get 3 standalone gauges for what I want to track. What about fuel pressure? If the G8 provides that and trans temp from the ECM I might can justify the AF gauge...
There's no fuel pressure sensor in these, youl have to tap the fuel rail/line and add a gauge. With EFILive you can enable EGR, tap the EGR pin at the ECU, and send a 0-5v signal to datalog a sensor output. You can also tap the AC Pressure sensor temporarily for logging a sensor via the OBDII port.
K, gives me food for thought. Either way looks like I need a 3 pod panel. Worse case I can monitor trans temp in the engineering mode.
Aeroforce can monitor trans temp.
10.17 @145
https://youtu.be/nN0rz1RAcJw
It will do boost and trans temp out of the box. Add a wideband for AFR. Not sure about fuel pressure.
http://www.aeroforcetech.com/products_interceptor.html
10.17 @145
https://youtu.be/nN0rz1RAcJw