Guess this will be a dealer repair then... thanks for the heads up all. Of course will push them to try to find out WHY it did it in the first place, if possible. Will have them look at front strut towers as well...
Guess this will be a dealer repair then... thanks for the heads up all. Of course will push them to try to find out WHY it did it in the first place, if possible. Will have them look at front strut towers as well...
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
Hub bearings are sealed. Your guess is as good as theirs when it comes to a failure.
**RIP Shaun Finley**
FUCK CANCER
**RIP Charlie**
'16 2SS NFG Camaro M6 NPP Mag
Procharged, custom 4.5" heat exchanger, custom cam
LT4 fuel system and top hardware, Stainless Works long tubes
Weld wheels, Hoosier rear fatties, M&H front skinnies
You have a friend with a lift? I know you said you can move it North/South. Can you see exactly what is moving?Originally Posted by STL_G8GT
Rest in Peace Charlie!
Sold
Just a GT
I used jackstands for just about everying.
The Sears tech is who noticed it, I can ask him if he saw play in any of the other rear suspension components while he was back there... or once I get this damn trans bug figured out, jack it up myself...
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
take it to a reputable tire shop. Not sure about where you live, but SEARS ain't it.
If Guns Kill people, then Spoons Cause Diabetes
Fair enough, but I did feel confident in the tech based on work he's done for me in the past. We'll see what the dealer says! (And then maybe a local tire shop)
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
Posting Permissions
Reply With Quote