Thanks guys. I put some more pictures in the first post. What's crazy is that these were no harder to install than the shocks were on my C5!
Thanks guys. I put some more pictures in the first post. What's crazy is that these were no harder to install than the shocks were on my C5!
Last edited by Steve GT; 07-10-2011 at 08:13 PM.
Pat G Custom EPS Cam, 3200 Yank, Kooks 1 7/8" longtubes, FAST 102 LSXR, and a Rotofab CAI. Tuned by Pat G.
Nice Pics!
Office: 1(888)257-1422
Email: Sales@AutoAgenda.com
Facebook: Find us on Facebook!
Twitter: Follow us on Twitter!
Just ordered mine today, I think they should be here Friday or Monday. Did you get your alignment yet? Make sure you do that.
Roots blower by Magnacharger 469 hp 498 torque on Mustang dyno 12 lbs of boost
Should be over 500 rwhp with cog drive, now 12 lbs of boost, no dyno or track time since od cog drive
After Maggie 11.86 @ 115.33 w/1.74 60 ft (best 60ft 1.63.) (Nov. 6, 2010) Temp 60, DA 1158
After Maggie 1/8 mile 7.58, best mph 92.16 w/1.66. Kooks Mids w/cats, H-pipe, cheap mufflers.
20x8.5 and 20x9.5 Lorenzo Black Wl032 wheels Sumitomo Htr 3's 255-35 and 275-35's
Eibach prokit with Lovell strut/shocks, Ctsv/Camaro Brakes
The above Dyno numbers were after the sale to born2fly (awsome)
New Ride is 82 malibu wagon with 6.0 ly6 and ported l92 heads, comp cam, holley hi ram intake, hedman headers, 4l60 w/3000 stall and more
I think the ride height is perfect the way you have it now. Looks good!
Yes, I got an alignment but they did a crappy job so I'm going to take it back and tell them to do it right. They were telling me I need a camber kit and left my car with positive camber up front. From what I've been told, that isn't needed and they just didn't know what they were doing. Oh yeah, car pulls a little bit after the alignment and it never did that before...
Pat G Custom EPS Cam, 3200 Yank, Kooks 1 7/8" longtubes, FAST 102 LSXR, and a Rotofab CAI. Tuned by Pat G.
I decided the car wasn't low enough so I went down another 1/2" all around when I got off of work today. I think it's sitting right now and I'm pretty happy with the overall look. There is about one finger of clearance room between the tire and fender up front and the back is tucking the tire just slightly so I'm going to call it good for now and go get it aligned.
Pat G Custom EPS Cam, 3200 Yank, Kooks 1 7/8" longtubes, FAST 102 LSXR, and a Rotofab CAI. Tuned by Pat G.
+1
2009 Panther Black Metallic "The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed Curt here
Love the ride height, Steve, but how is the ride quality/handling?
Yes for us larger guys that screw can be a pain!
08 G8 GT, IOM, Rotofab, HSRK, Kooks LTs, track pipes, Custom engine covers, catch can, radiator cover, and tranny tunnel brace. 402hp/396tq - not bad for a bolt -on car.
8.43 1/8th; 2.01 60' - no skillz.
go lower lol, but seriously black out the trim and you know whats next