Site Sponsors & Vendors
Results 1 to 5 of 5

Thread: CTS-V wheel fitment and center caps

  1. #1
    Member Mick3's Avatar
    Join Date
    Dec 2010
    Location
    Jupiter, Florida
    Posts
    73
    Post Thanks / Like

    Default CTS-V wheel fitment and center caps

    I have seen many CTS-V wheels for sale on this forum and eBay. I've alway thought the CTS-V wheels look very similar to the HSV GTS wheels. Do the CTS-V wheels fit the G8GT? Most of the CTS-V wheels I have seen are staggered (245/40/19 & 285/35/19). Are the front and rear offset a good fit? Also, I have been doing some research to see if the HOLDEN GTS center caps will fit the CTS-V wheel. But, I have not found the outside diameter and inside diameter of the CTS-V wheel center cap area or anyone that has used the HOLDEN center caps on CTS-V wheels. Does the GTS center cap fit or does anyone know the OD/ID of the center cap area?

    2008 Panther Black G8GT Stock

  2. #2
    Member Mick3's Avatar
    Join Date
    Dec 2010
    Location
    Jupiter, Florida
    Posts
    73
    Post Thanks / Like

    Default

    According to one member, the center cap outside diameter is 2.625" (approx 66.7mm). So, the GTS centercaps will NOT fit correctly (63mm).

    2008 Panther Black G8GT Stock

  3. #3
    Senior Member hulkss's Avatar
    Join Date
    Jun 2009
    Location
    Chaska, MN
    Posts
    399
    Post Thanks / Like

    Default

    Look here: CTS-V Wheel Post

    Proper front tires are 255/40-19
    VE Commodore Sedan SS V-Series Special Edition, Left Hand Drive, PBM, Hacked Atari Gauges
    Power: 2014 Chevy Performance LS3 Crate Motor; Patrick G Tune, VCM Intake, Vector HSRK; Solo High Flow Cats, Solo Mid-Pipes
    Appearance: Vortekz Generators; RedlineGoods Shifter Boot; Holden Badges; GXP Diffuser; Stub antenna
    Handling: BMR Sub Frame Bushings, CTS-V Wheels, 255/40 & 285/35 Bridgestone S-04 Tires, GXP Rear Stabilizer Bar
    Brakes Centric Premium Rotors, ACDelco Ceramic Pads

  4. #4
    Junior Member
    Join Date
    Feb 2017
    Posts
    5
    Post Thanks / Like

    Default

    I have custom center caps and may offer them at a decent price
    IMG_7734.JPGIMG_7732.JPG

  5. #5
    VIP Member BuildItYourSelf's Avatar
    Join Date
    May 2012
    Location
    merca!!!
    Posts
    1,422
    Post Thanks / Like

    Default

    66.7mm is hub bore. I believe the g6 centers fit the v2 wheels.
    But overlay the caddy caps they are smooth.
    2008 GT-M. PBM, #885

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •